Finding The Right Roofing Company

February 21, 2019

How To Hire A Roofing Contractor

Finding and hiring the right contractor for a roofing project is an important task. In most circumstances, the project is major and represents a sizeable amount of money. Since most homeowners will need to hire a roofer only once or twice in their lives, they don't have a lot of experience with the process. Before hiring someone to work on the roof, homeowners should learn what the law requires of each party, what their rights are, and what to do if things go wrong. Whether it is a reputable roofer in sacramento or are happy to help homeowners in this process and will answer any questions they may have.

In, home improvement contractors must be certified by the state contractors license board CSLB. The definition of a contractor is very broad and includes every home repair service. Contractors must pass an exam before becoming state licensed. Uninformed homeowners might think that being state licensed means that the contractor has passed some type of competency exam. However, the state exam only makes sure that contractors are familiar with the law in regard to contract requirements, down payments, and informing homeowners of what might happen to their home if the contractor's bill is not paid. The exam is open book and consists of 20 multiple choice questions. Clearly, being state licensed in this instance does not grant the homeowner any assurance of the contractor's ability to perform the repairs.

Homeowners must do further research to find a competent roofer. The best roofers are factory certified. These manufacturers of roofing products often have very strict requirements for contractors who use their products before endorsing them. For example,GAF  requires its certified contractors to pass a strenuous exam that covers the proper uses and installation of their shingles and other roofing materials. This ensures homeowners that the contractors that GAF endorses have the highest level of roofing competency. This certification must be renewed every two years, making GAF certified roofers very knowledgeable about the best practices in installation and advances in roofing technology. Other manufacturers, like CertainTeed, also certify contractors.

Some manufacturers require more than skill competency of their certified roofers. GAF requires contractors to have a good credit rating and to have been in business for at least seven years. These requirements give homeowners peace of mind knowing that the contractor has a proven success record and that an unpaid shingle supplier will not place a mechanic's lien on their home. Each manufacturer has its own requirements of its factory certified contractors. Homeowners should research each manufacturer's requirements before deciding which certification protects them from incompetency most effectively.

Hiring A Professional Roofer

There are a number of roofing companies that can replace or repair roofing systems. Choosing the prefect roofer can seem like a challenging task since most companies are designed to look good on the surface. However, there are certain things that a homeowner can look for before hiring a Sacramento roofing company to handle a roofing project.

The first thing that the homeowner should consider is how well the roofer handles and solves customer complaints. It's impossible for a roofer to be perfect all the time, so there will be moments when the company has to solve customer issues. The best way for homeowners to find out how roofers do this is to request referrals from past jobs that involved some kind of complaint. Not all roofers will agree to this, but the ones who do are confident in the way they handled the complaints. Another way to gain this information is for homeowners to check for complaints filed with the Better Business Bureau. If complaints are found, they can talk to the roofers to find out how long it took to resolve the complaints and what was done to fix them.

Homeowners should also find out if the roofers they want to hire offer workmanship warranties. These differ from manufacturer warranties because homeowners are covered in the event that leaks occur because of poor installation.

Most of the time, workmanship warranties cover any installation mistakes that are identified within the first year. Since manufacturers only offer warranties if their products are installed correctly, making sure that contractors offer workmanship warranties is very important. It's just as important for homeowners to have the warranties explained in detail. Both the homeowners and contractors should have copies of these details.

Additionally, homeowners should ensure that their roofers carry insurance, including both liability and compensation insurance. This protects the homeowners in the event that the roofers become injured while working on their property. When roofers say that they have insurance, homeowners should always ask to see the certificates to prove it rather than take the contractors at their word. If a roofer is not willing to show an insurance certificate, this should raise a warning flag for the homeowner.

Finally, it's best to choose roofers who have physical addresses. Those with addresses that are close by may indicate that they can provide faster and better service. If roofers only provide PO boxes, the homeowners should ask for some kind of street address. Most roofers should be willing to provide this basic information to their clients.

Providing Relevant Information To The Roofer To Get A Good Scope Of Work

If you have had a recent storm come through and you had a leak, provide this information to the roofing contractor so that they can be aware of the type of roofing related problems that you are having. Understanding how to prevent pests as well as leaks will help you maintain your roof and get the most out of your roof. Not adequately maintaining your roof can cause you to have to replace it sooner than you would have otherwise needed to.

Common Roof Leak Problems

Identifying the source of a leak is necessary to stop it, but as homeowners discover, this can start out as a guessing game. The slowly expanding circle of moisture on an interior ceiling could be due to many issues, including leaking pipes inside a structure. Once other culprits have been ruled out, it's time to get someone on the roof.

Professional Davis roofing companies fix leaks regularly, so they know that where water seeps in can be very different from that spot on the ceiling. The majority of leaks occur at points where the roof is purposefully open. These penetrations are common, and they're created for special jobs, like installing skylights and venting appliances.

Penetrations can be difficult to seal properly, even by the professionals. Homeowners looking for a leak should inspect these areas first and use caulk or another sealant to close any small gaps.

A missing drip edge can allow moisture and even pests into a home. These metal components extend past the lip of the roof and lead water to the gutters. If the drip edge is damaged or removed, water can slide in between the roof sheathing and fascia or straight to the ground where it can pool near the foundation.

Sometimes, it's not the drip edge but the gutter that's the problem.

Gutters and downspouts should be free of debris, and water should run through them without any blockage. They should also be secured against the house and be placed at an angle to encourage water to run in the right direction. When one of these things goes awry, the gutters can dump water back onto the roof or onto the ground, leading in both cases to water damage.

Finally, flashing can slip, be blown out of place or be sealed with the wrong kind of product. Flashing is regularly used around roof penetrations and places where roofs and walls meet.

Of course, at the first sign of a spot on the ceiling, a trip to the attic is necessary. Homeowners should check for leaking pipes first and then check for open windows. The insulation should be checked for water damage. If damp insulation is the culprit, homeowners should make sure the attic is ventilated properly.

A leaking roof can cause a lot of damage, but homeowners may need some help finding the source. If an inspection of an attic or the exterior of a home doesn't identify the problem, it may be necessary to call in a professional.

Preventing Common Roof Leaks In Your Home

Water is a major factor in most cases of structural damage to residential and commercial buildings. The property owner may not even realize that the roof is leaking until significant harm has been done to the framing, walls and ceiling. In order to prevent moisture from getting into attic spaces, every layer of the roofing system must be adequately sealed. Roofing specialists can thoroughly inspect the sheathing, underlayment and roof covering along with all the ridges, valleys, eaves and areas of penetration. If openings exist, they can be quickly and easily repaired.

A roof's sheathing needs to be waterproof so that the interior will stay dry if the covering and underlayment get punctured or blown off. Since the decking sheets are laid with a small gap between them to allow for expanding and contracting, they must be taped. Rather than depending on duct tape to stop the potential flow of water, the builder should secure the openings with 4 inch bitumen tape. This "peel and seal" product adheres well to many substrates and is usually covered with an aluminum film for water resistance. The tape can stretch and shrink without losing its functionality. In comparison to metal flashing, bitumen tape often proves to be more effective.

Although the main purpose of underlayment is to guard against water leaks, it is not foolproof. The material, whether felt or synthetic, is water resistant but not normally airtight.

Areas around nails and fasteners can be prone to leakage unless sealant is applied. Some of the new synthetic underlayments on the market are self adhesive and will hopefully increase the level of protection against moisture. With periodic maintenance, this roof layer can be kept in good condition for optimal performance.

Regardless of the roof covering type, heavy rain can make its way past the barriers and wreak havoc on the materials below. Metal panels and roll roofing products leave fewer joints and edges for water to seep through than smaller components such as shingles and tile. However, they are frequently installed on flat roofs and accumulate ponding water. A sloped roof encourages precipitation to flow to the ground freely. At ridges and valleys, a waterproof membrane is a must in order to keep the water from dripping down to the underlayment. Areas of penetration, like around chimneys, require flashing. A drip edge at the eaves is often able to hold up against driving rain. Most roof coverings can benefit from the routine application of a solid, waterproof coating. In addition to keeping rainwater on the building's exterior, an elastomeric coating can stop metal from rusting and prevent UV damage.

In every region with an annual wet season, the residents understand the importance of maintaining a waterproof roofing system. From the sheathing materials that lay directly over the rafters to the covering that offers aesthetic appeal, extensive damage can occur if the property owner does not take precautionary measures against water leaks.

Knowing If You Have Roof Pest Damage

The average asphalt shingle roof has an anticipated life span of 20 years. But in addition to the damage that happens over time due to age and exposure, pests can also infest and cause significant damage to a roof. The good news is that when caught early, the majority of infestations can be taken care of by natural means. This will often require the use of a pest control company, but to repair any damage to the roof consider calling a professional for an assessment.

The type of pests that homeowners should be on the lookout for vary by region, season and the type of roofing material used. But some types of pests are common to most areas. Birds can be a real problem, especially in the springtime during nesting season. First of all, bird droppings are very acidic and can actually eat away at roofing materials, especially tar based ones, eventually leading to leaks in the roof. Second, and less obvious perhaps, is the fact that bird nests are highly flammable, and their presence can create a fire hazard. Birds often build their nests in drainpipes and the corners of roofs where drains are located. Blocked drainage systems can lead to serious roofing problems. When water has nowhere to go out of a drain it will get wicked up into roofing materials where it can cause a leak.

Homeowners need to clean and clear their roofs regularly. Remove old bird's nests, and wash the roof of bird droppings with a hose. You may need call for pest control in sacramento if you are having issues with this and need an honest assess what needs to be done.

Raccoons and squirrels will also cause damage to a roof. They will pull off shingles that are starting to bend. In the case of raccoons, their weight alone can damage a roof. It is even worse if they enter an attic to set up a nest. Raccoons will chew and claw through roofing to get into an attic. Keeping the home's roofing in good repair will make it more difficult for them to gain entry. An important step to take to prevent these furry creatures from accessing a roof is to trim any tree branches that overhang a house. No branches should be closer to the roof than 7 feet. There are humane traps homeowners can obtain, usually from the local humane society, which can be used to catch and release any of these unwelcome house guests.

Keeping tree branches trimmed, regularly clearing the roof of nests and droppings, and keeping the home's roof in good repair are the main steps a homeowner can take to defend against roof pests like birds, raccoons and squirrels. You may need to contact a sacramento rodent control expert in your local area to see if you need to make repairs to keep the rodents out.

Frequently Asked Roofing Questions

What are the required elements of a California home improvement contract?

A written contract is required for all home improvement work costing more than $500. Each contract must describe the work to be done, the materials that will be used and a begin and completion date. The contractor's state license number, as well as certain legal notices, is also required to be prominently placed on the contract.

Will a wasp nest cause damage to a roof?

No, in most cases a wasp nest is not of any danger to a roof. It is a nuisance and a possible danger to the inhabitants of a home, particularly if anyone is allergic to wasp stings. Removing a wasp nest can be dangerous, because it requires being up on a ladder where one will be susceptible to attack by a swarm of angry wasps. It's usually a good idea to call in a pest removal specialist to remove wasp nests.

Common Roofing Terms Defined

Mechanic's lien

The California Mechanic's Law states, "Any contractor, subcontractor, supplier, or other entity who helps to improve a property, but is not paid for their work or supplies, has a right to place a lien on the home, land, or property where the work was performed and to sue the homeowner in court to obtain payment.

Better business bureau

The Better Business Bureau, more often referred to as the BBB, is an organization that provides ratings on companies based on consumer feedback. This information can then be used by potential clients to determine the trustworthiness of those companies especially roofing companies!

Humane traps

Humane traps, also called live animal traps, are traps designed to capture animals without killing or injuring them. Typically, these traps are cages that have a door triggered to close and lock when an animal steps on a trigger pad inside of the cage. Bait is used to lure the animal inside.

See Also:

Top Home Improvement Tips

Get the repairs done.
We only refer you to the absolute best contractors in your area and you can quickly get multiple bids from qualified contractors in your area. Start today and we will help you find the best fit for your remodel or repair job.
Start Now